Skip to content
New raiser on a second-storey addition in Ermington
Level 2 electrical

Point of Attachment Upgrade Parramatta

Rusted raisers swapped and attachment points moved so the service line clears your new roof, carport or storey.

Get a free quote

Takes a minute. We'll call you back, usually the same day.

No obligation. Your details stay with us and are never sold or shared.

The point of attachment is where the service line from the street meets your house: a raiser pipe through the roof or a bracket on the wall. On many Parramatta homes it’s original, rusted, or simply in the wrong place for the renovation you’re planning. Moving or replacing it is network-side work that needs an accredited Level 2 electrician.

When it needs doing

Second storeys. The most common reason in Parramatta. As homes in Ermington, Rydalmere and Carlingford go up a level, the old attachment point ends up inside the new walls or too low.

Carports and garages. A new structure under the line must still meet the clearance rules.

Re-roofing. Swapping tiles for metal is the perfect time to replace an old raiser and its flashing.

Rust and damage. Raisers corrode where they pass through the roof, and brackets work loose over time.

Storms. Branches can bend raisers or pull brackets off the wall.

Raiser or bracket?

Single-storey homes usually have a raiser above the roof to keep the line high enough. Two-storey homes often use a wall bracket. We recommend whichever meets the clearance rules and suits the house.

Working with your builder

For a second storey, we meet the builder early. The supply may need a temporary connection while the frame goes up, then a new attachment point on the finished wall. Sometimes it’s simpler to take the supply underground with an overhead to underground conversion and avoid a raiser entirely.

Heritage homes

On Federation cottages in Harris Park and North Parramatta, we look for the least visible position that meets the rules, and we use fittings that sit neatly on the original structure.

Pair it with new mains

If the raiser is being replaced, the cable inside it often is too. A consumer mains upgrade on the same visit avoids a second outage.

Storm damage

If a raiser is bent over or the line is hanging low, keep clear and call our emergency level 2 electrician service. We make it safe and replace the fitting.

How long it takes

Most raiser replacements take a few hours, with the power off for part of that. Relocations for renovations take longer and are planned around the build.

The paperwork

We lodge the notification with the network, do the work and certify it. You get the certificate for your records and your builder’s.

Where we work

Raiser jobs come in from all over the area, including second-storey additions in level 2 electrician Ermington and Rydalmere.

Clearance rules in plain terms

The service line has to stay a set distance above driveways, roofs, balconies and anywhere people can reach. A new carport, pergola or balcony can bring a structure too close. We measure the existing heights, work out what the new structure changes, and set the new attachment point to suit, including for caravans, boats and work utes that sit higher than a car.

Tiles to metal

Swapping concrete or terracotta tiles for metal is common in Parramatta. The roofer works around the raiser, so it’s the right moment to replace it with a new galvanised one and fresh flashing.

Wall brackets on two-storey homes

On homes that are already two storeys, the service line usually attaches to a bracket high on the wall. Brackets loosen as masonry ages. If yours has pulled away or the line sags, we replace it with a new fixing.

Get a price

Call the level 2 electrician Parramatta team. Send a photo of the raiser and we’ll tell you what’s involved.

Updated

The price depends on whether the raiser is replaced or moved, the height and fixing, any roof work, and whether new mains are needed at the same time. We confirm a fixed price on site.

What good point of attachment upgrade looks like

Close-up of point of attachment upgrade on a home in the Parramatta area
What point of attachment upgrade looks like up close on a typical Parramatta area home.
Signs that point of attachment upgrade needs attention
Typical signs that it needs attention.

Point of Attachment Upgrade in Parramatta: step by step

  1. Check clearancesLine heights over driveways, roofs and new structures measured.
  2. Plan the new pointRaiser or bracket position agreed with you and your builder.
  3. Isolate and replaceSupply made safe, new fitting installed and flashed.
  4. ReconnectLine re-attached, tested and certified.

Point of Attachment Upgrade questions in Parramatta

Something else on your mind? Call 02 9158 9915 and ask.

We're adding a second storey. What happens to the service line?

The attachment point usually moves to the new structure, or the supply goes underground. We plan it with your builder before the frame goes up.

Our raiser is rusted where it goes through the roof. Can you just replace that?

Yes. A new galvanised raiser with fresh flashing, usually in a few hours.

Can a new carport go under the line?

Only if the clearance rules are still met. Often the line has to be raised first.

Need a Level 2 electrician in Parramatta?

📞 Call now Free quote