Power Disconnection and Reconnection Parramatta
Power made safe at the network side for demolishers, roofers and builders, then reconnected and certified when they're done.
Turning off the main switch doesn’t make your supply safe. The service line, raiser and mains to the meter stay live, and anyone working near them needs the supply isolated at the network side. In Parramatta, with duplex rebuilds, demolitions and renovations on almost every street, power disconnection and reconnection is daily work for us.
Demolitions and duplex rebuilds
Before an old house comes down, the supply has to be permanently disconnected and the service removed. We book it ahead of the demolition date and usually set up a temporary builders supply on the same visit so the trades have power from day one. At handover, we connect the new homes.
Re-roofs
Many brick and fibro homes in Ermington, Dundas and Toongabbie are getting metal roofs. Roofers work right beside the raiser, so the supply has to be isolated. We disconnect for the days they need and reconnect when they’re finished. If the raiser is rusted, we replace it at reconnection with a point of attachment upgrade.
Renovations and extensions
Extensions often move the meter board or change the supply route. Second storeys usually need the attachment point moved. We fit around the builder’s program so the house is without power for as little time as possible.
Switchboard upgrades
When your electrician replaces the switchboard, the supply is isolated at the network side. We book the same day so it’s done in one outage.
Temporary or permanent
A temporary disconnection is for work that ends with the house back on. A permanent one is for demolition: the service is removed and the retailer takes the meter. Tell us which you need when booking.
Strata and attached homes
Townhouses and older strata blocks around Parramatta often have grouped meters. Isolating one unit can affect the neighbours, so we check the arrangement first and help with notice.
On the day
We confirm with the trades what they’ll be doing, isolate at the right point and make sure the supply can’t be re-energised by accident. On reconnection day, we check the raiser, mains and clearances, reconnect, test and certify.
Paperwork
We lodge the network notification and give builders and roofers written confirmation of the isolation for their safety records.
Where we work
Disconnections are booked right across the area, including many rebuild sites in level 2 electrician Merrylands and Granville.
Which point we isolate at
On overhead streets we usually isolate at the pole or the point of attachment. On underground streets, at the pit on the boundary. For rear houses fed by private poles, isolating at the first pole can make the whole private line safe in one go. We choose the point that keeps the work area safe while leaving as little switched off as possible.
Tenanted homes
Landlords and agents book isolations for re-roofs and repairs on rented homes. We give a clear time window the agent can pass on to tenants and keep the outage as short as the trades allow.
Re-energising safely
Before we reconnect, we check that the raiser, mains and meter board haven’t been damaged by the work, that clearances still meet the rules, and that your electrician has finished inside. Then we restore supply and test.
Book it
Call the level 2 electrician Parramatta team with your dates. If something is unsafe right now, call our emergency level 2 electrician number.
Updated
What good power disconnection and reconnection looks like
Power Disconnection and Reconnection across Parramatta
Power Disconnection and Reconnection in Parramatta: step by step
- Set the datesWe work to your builder, demolisher or roofer's program.
- Notify the networkNotification lodged before anything is touched.
- IsolateSupply made dead and safe at the pole, pit or private pole.
- Restore or removeReconnected and tested, or removed for demolition.
Power Disconnection and Reconnection guides for Parramatta homeowners
- Duplex power connection in Parramatta: planning the supply from demolition to handoverHow the supply works when you knock down and build a duplex in Parramatta, from disconnection and site power to three phase and the final connections.
- Second storey addition power in Parramatta: what happens to your supply when you build upWhat happens to the service line, raiser and mains when you add a second storey to a Parramatta home, and how to plan it with your builder.
Power Disconnection and Reconnection questions in Parramatta
Something else on your mind? Call 02 9158 9915 and ask.
We're demolishing for a duplex. When should the power come off?
Book the permanent disconnection a week or two before demolition, and set up site power on the same visit.
Does the roofer need the power off for a re-roof?
If they're working near the raiser or service line, yes. We isolate for the days they need.
Can you handle several lots for one builder?
Yes. Send the lot list and dates and we'll run it as one program.